Pharma-Grade CO2 Extraction Systems
2x5L KINETIC CO2 Extraction System
- (2) 5.0-liter extraction vessels (1.3 gallons each)
- (3) 2.5-liter separation vessels for fractionation
- Aqueous-phase recovery system
- Inline Winterization
- Co-solvent injection system (Clean-in-place)
Throughput:
- Up to 300 pounds of plant material/day
- 8 pounds of material per run (Non-pelletized)
- 20-60 minute run time
Get Pricing
2x10L KINETIC CO2 Extraction System
- (2) 10.0-liter extraction vessels (2.6 gallons each)
- (3) 2.5-liter separation vessels for fractionation
- Aqueous-phase recovery system
- Inline Winterization
- Co-solvent injection system (Clean-in-place)
Throughput:
- Up to 600 pounds of plant material/day
- 16 pounds of material per run (Non-pelletized)
- 35-100 minute run time
*Throughput numbers dependent on plant material and quality, preparation and system configuration. Results may vary based on desired outcome.
Get Pricing
Please enquire about our 4×10 liter system slated to release in the near future! Note: Throughput approximately 2500 pounds of plant material/daily
Get in Touch
co2 extraction system
Kiinja Advantage
- Fully automated – NO tools required!
- Adjustable pressures from 800 psi to 10,000 psi
- Adjustable temperatures, pressures and flow rates – all controlled by the PLC (Programmable Logic Controller) and can be adjusted on the fly
- All processing valves are computer controlled with closed loop position feedback for added safety and efficiencies
- All vessels (extractors and collectors) lock and unlock with position feedback through the PLC control system. Unique patented vessels
- No pressure end caps for the operator to remove or handle
- All thermal, pressures and sealing monitored by the PLC control system
- 15” PLC touch screen control panel with HMI (Human-Machine Interface)
- Capable of storing 100s of recipes for different process configurations
- Remote access for troubleshooting and system diagnosis
- Water & water soluble component capture system
- Very QUIET with FAST cycle time
Various Operations:
- Continuous Mode Operation – extended process runs without shutting down the system
- Series Configuration
- Parallel Configuration
- Single Vessel Configuration
Parameters:
- Pressure Ranges: 800-10,000 psi
- Temperature Range: -5 C to 90 C
- Flow Rate: Adjustable – 1 liquid liter/minute (2x5L); 2 liquid liters/minute (2x10L)
*Individual adjustable thermal and pressure control for each vessel
Extractor Machine Specifications
- 120” wide x 85” high x 60” deep
- Approximate weight 9,000 lbs
- 75A 208V 3 Phase with neutral and ground (estimate of maximum amperage demand)
- 1.5” diameter copper vent line to the outside of the building
- Gas CO2 at 800 psi minimum
Chiller Specifications
- 75” wide x 24” deep x 78” tall
- Approximate weight 1,800 lbs
- 75A 208V 3 Phase with ground
- CAT 5 Ethernet cable to the KINETIC skid
- (2) 1-½ “ copper insulated process water lines to the KINETIC skid
